Human speech is between about 130-300Hz, so even with a lower poling rate it can pick it up. And assuming she sound like a mosquito, it’ll pick things up.
I doubt it, 300Hz is very low. The lowest fidelity frequently band used in telephony is comprised between 300Hz and 3400Hz, specifically excluding everything below 300Hz (voice frequently)
In these sources they are talking about the fundamental frequency of human Speech F0. Which is one important indicator but I don’t think this band is sufficient for comprehension. Record yourself, apply a low-pass filter with cut frequently at 300Hz and check for yourself if this is enough to understand. It might be enough to make out some words, but I doubt it’s enough to hear clearly.
I wonder if it would sound better taped on, in the drum itself, or on the floor in front. Seems like there would be minimal bleed too haha, might be a cool lo-fi thing
That requires a mouse with an 8kHz polling rate. With a 1kHz polling rate, this trick will be limited to sounds under 500Hz.
Cool, cool. So what hertz range would you say a woman moaning or a particularly loud fart fall around ? Just out of curiosity…
Human speech is between about 130-300Hz, so even with a lower poling rate it can pick it up. And assuming she sound like a mosquito, it’ll pick things up.
I doubt it, 300Hz is very low. The lowest fidelity frequently band used in telephony is comprised between 300Hz and 3400Hz, specifically excluding everything below 300Hz (voice frequently)
https://www.ico-optics.org/what-hz-is-human-voice/
https://www.voicescience.org/2025/05/lexicon/average-speaking-frequencies/
http://www.1st-acoustics.com/knowledge/frequency-range-for-human-voice.html
In these sources they are talking about the fundamental frequency of human Speech F0. Which is one important indicator but I don’t think this band is sufficient for comprehension. Record yourself, apply a low-pass filter with cut frequently at 300Hz and check for yourself if this is enough to understand. It might be enough to make out some words, but I doubt it’s enough to hear clearly.
Maybe machine learning can infer the missing wave information (like Fourier transforming partial waveforms??
Huh you know from a music perspective I know we can get a lot higher than 500hz but most speech is apparently around 1-300hz.
I only speak in infrasound…
Well now I kind of want to mic up a kick drum with my gaming mouse for fun lol
I wonder if it would sound better taped on, in the drum itself, or on the floor in front. Seems like there would be minimal bleed too haha, might be a cool lo-fi thing
And probably only works when configured to use the the highest DPI settings.