I just recently got 1 gigabit up/down at home when they put in fiber. Now I’m looking for a router/firewall to use. I run a homelab with a few VMs.

I was looking at getting a Cisco router to tinker with, as I’ve just finished a course on IOS. What routers would you recommend (2nd hand) for less than 150€? Is Cisco even feasible at this price point or should I just get a mini pc and run pfsense/opnsense?

I’ve looked at the ISR900 and it seems to meet my requirements, but I am not sure if it also offers a web interface, which would be quite useful for me.

Bit of an unstructured post but I hope you’ll be able to help me regardless.

EDIT: I ended up getting a mikrotik hAP ac3 router. It seems to meet my requirements and after trying the routerOS demo they have up I decided that it would work for me.

  • TCB13@lemmy.worldEnglish
    2·
    10 months ago

    How much wifi and open-source do you really want?

    If you are willing to go with commercial hardware + open source firmware (OpenWRT) you might want to check the table of hardware of OpenWrt at https://openwrt.org/toh/views/toh_available_16128_ax-wifi and https://openwrt.org/toh/views/toh_available_864_ac-wifi. One solid pick for the future might be the Netgear WAX2* line or the GL.iNet GL-MT6000. One of those models is now fully supported the others are on the way. In OpenWRT forum and Wiki you may also find throughput tests of some routers.

    For a full open-source hardware and software experience you need a more exotic brand like this https://www.banana-pi.org/en/bananapi-router/. The BananaPi BPi R3 and here is a very good option with a 4 core CPU, 2GB of RAM Wifi6 and two 2.5G SFP ports besides the 4 ethernet ports. There’s also an upcoming board the BPI-R4 with optional Wifi 7 and 10G SPF.

    Both solutions will lead to OpenWRT when it comes to software, it is better than any commercial firmware but there might be catch about open-source wifi. The best performing wifi chips are Broadcom and those don’t usually see open-source software support. MediaTek is the open-source alternative and while they work fine they can’t, unfortunately, beat Broadcom. As most hardware is Broadcom they have hacks that go behind the published wifi standards and get it go a few megabytes/second faster and/or improve the range a bit.

    While there are things like OPNsense and pfSense that may make sense in some cases you most likely don’t require that. You’ve a small network and OpenWRT will provide you with a much cleaner open-source experience and also allow for all the customization you would like. Another great advantage of OpenWRT is that with a great router like the BananaPi BPi R3 you’ve the ability to install 3rd party stuff in your router, you may even use qemu to virtualize stuff like your Pi-Hole on it or simply run docker containers.