Yeah,US training is a joke,tbh. Some of the best Emergency medical services are in the US. But most services are sadly an utter joke and the basic qualification necessary to respond to emergency calls wouldn’t be sufficient to drive people between nursing homes in most other countries.

In comparison:

• Australia: B.sc (3.5 years)
• UK: EMT(12-18 Month),mostly Paramedic (B.sc),though
• Germany: Paramedic (3 year apprenticeship) (supported by Physicans)
• Switzerland: Paramedic (3 years) (supported by Physicans)

It depends on the type of “nursing home” - in a facility catering for more mobile clients, yes, there are some benefits from it and there are actually some good studies on it. The major obstacle is the reduced joint mobility (Arthritis of the fingers) and reduced reaction times. Therefore it would be paramount to use adapted control methods and adapted games.

In a nursing home that has a clientbase focused on the nursing aspect it’s far more difficult - most clients will be “too far gone” for most aspects of gaming with a regular PC,but there are some studies using adapted devices and therapists to activate patients ressources.

EMS structure is highly heterogeneous. Where are you from?

Same with healthcare. I am a paramedic by trade, was the youngest in my class, youngest commander, went to work around the world, from the European Alps to the African jungle to Australian outback.

It was quite a journey.

But sadly I had to recognise that I am not cut out of the wood that is required to survive in today’s healthcare systems in industrial nations. It made me profoundly hate humans and even more sick humans. I dread every single day I still have to work with patients. Especially awake patients. I can’t handle them anymore. Don’t get me wrong. I am still giving 100%, sometimes more - and I don’t judge,like some other colleagues do over the years. I don’t care if you are a frequent flyer, a drunk or a murderer - I will give everything and be very nice to you. But inside me? I burn out.

It’s not that I can’t work with the misery,with things I’ve seen. It’s just that I can’t work with people and the system they are part of anymore.I am now lucky enough to mostly be “off the road” in a cushy,self employed, desk job. But still, I can’t fully leave healthcare,as I invested to much. And so I will torture myself again.

In less than 5 hours my alarm clock is going off for another shift. And I am dreading the moment it will.

Fuck.

Which country are you from?

EMS/Ambulance workers

As someone in the final stages of a masters degree in healthcare management and economics:

Almost. It doesn’t entirely cover the costs (at least from the data we have available worldwide, which is somewhat insufficient) but a focus on mental health(which always includes workers rights, women’s rights and a few more social issues that create long term health problems on a massive scale) and prophylaxis in general is FAR cheaper than what most industrial nations currently do.

We do have a few issues that are not addressed in these concepts (e.g. end of life care and costs associated with that, new types of personalised medication, accessibility in rural areas,etc.) that still make a healthcare system like that something society has to pay for…But it does improve things massively, especially the quality of life of people that are not the actual patients.

In absolute numbers the table saw will win because everyone has one. But they can be used in a safe way - with a sliding carriage, a push stick and a cover or even a saw stop(even though that is a ridiculous shitshow on my side of the pond)you have a near 0% chance of hurting yourself. That is different for a lot of other machines. They can hurt you even if you do things right but are unlucky.

Band saws are far more likely to hurt someone and old planes are inherently unsafe as their spindles often are designed in a way that they often easily send their blades towards their operators. Especially when they are older models. And of course mortisers - I saw some really really gnarly shit over the years, e.g. someone who lost control of their mortiser when hitting an knothole and then the machine went towards his groin - still running as he panicked and did squeeze the handle even stronger by reflex. In the end the half groin area was bloody pulp he injured a major vessel that nearly killed him. A friend of mine collapsed (due to a medical issue) on a table mortiser and missed the blade by less than 2cm. With a table saw he would have simply collapsed on the cover, here it was pure luck.

Oh god,angle grinders,yeah… I have one, but I don’t use it in my workshop for obvious reasons.

The wife recently thought I had a stroke as I was screaming at the TV, because a show had invited an “expert” who was cutting some metal in front of the audience.

… Without ANY safety equipment on himself or the machine. … Heavily BENDING the disk.

… Someone is going to do this like on TV…and die…I was impressed that none of the audience died because that’s where the blade would have landed.

And I saw first hand was an angle grinder disk does to someones skull. It has the habit of stopping in a place that will not kill you. But leave you blind,deaf and dumb, suffering for a long time. They scare me. When I use mine, I am wearing full PPE, have a guard on the machine and still keep a tourniquet around.

Woodworking hobbyist with an emergency medicine background who worked in a replantation centre for a while: I can absolutely confirm this.

And table saws are amongst the most harmless devices in an average workshop.

I saw some gnarly shit over the years and tbh, I had some near miss cases as well on my own. (like when a milling head died on my DIY CNC and flew through the workshop - close enough to my jugular vein to graze my skin. 5mm to the right and I would have been in a very very bad spot)

Fuck yeah. I sailed in my youth (90ies, Optimist,Laser) and it was batshit insane on the Laser. A female friend of mine decided to sail in the Laser team as she enjoyed solo boats and my club did not offer a club owned Europe (the go-to “female solo” class around here). So it was an economical decision as well.

It was a shitshow for her. She literally was asked not to apply for some races as they weren’t interested in having to provide a woman the required infrastructure,etc. And once she ignored that our own club leadership put pressure on her not to ruin the good relationship they had with “this and this club”.

I quit sailing for the monetary gatekeeping, she quit for the misogyny.

For woodworking: Add the “old machines were soooo much safer,you need to use this 1968 Asshole-Wankerville saw if you realllllyyy want to have safety”(not true, especially when using planers) and the “if you don’t do it this way you should not be let close to a pencil!”(does it in an antiquated, overly complicated way that is safe but if you do one little thing wrong it isn’t anymore)-Gatekeepers.

Especially the whole story around saw-stop and how it was perceived by amateurs (even when they were unaffected by the manufacturers propaganda) is a shame.

Old machines can be good. Old machines can be a deathtrap. And things decay over time and something rotating with 30.000 RPM for 50 years close to someones groin/stomach maybe isn’t a risk someones should take lightly.

And most people who talk like this are old idiots who learned/teached themselves how to do things somewhere in the 70ies/80ies and then never developed after that. But they are so fucking sure about themselves.

I have an emergency medicine background, including some accident research. And even then people try to argue with me. “No,that kind of injury can never happen with this brand”. Idiot, I have seen it myself,talked to the person who nearly killed themselves, etc.

Yeah, and better don’t tell people that coronaviridae are a big part of that - long before SARS_CoV_2/Covid_19.

The problem is that there is not one cancer. But a myriad of cancers. That is the actual problem.

Well, together with at will employment it makes the slaves,eh sorry, team members much more well behaved.

You still have times when there is nothing to do?

I haven’t seen that… in decades.

If there is no patient care there is documentation. If there is no documentation there is administration/supplies. If that is done there is something to clean.

And if that is done there might be a paper/medical book to read.Or discuss a case with someone.

…Okay, you got me…I am a former manager…

But tbf, we have sacred break times here, but when you work you work. (And well, we have less hours than people in other countries)

Most definitely - Especially for woodworking FreeCAD is horrible and inefficient - even a friend who has been a contributor takes longer for some things than I do in Fusion360 as an occasional user. As a maker I love the idea of FreeCAD and the implications it has for third world countries, the amateur maker scene,etc. But I hate it for what it is. Which is so sad.

The definition of real time collaboration does vary widely from usecase to usecase and user to user. While the Joplin mobile app in theory does limit the minimum synch time to every 5 minutes there are (easy) ways to circumvent that and have a faster synch (I use every 60sec, but I selfhost).

Everything else you mentioned/require is available with Joplin. It literally has a checkbox Note-Type (but checkboxes can be easily added to every other note as well) which can easily be check off, Notes can be categorised into folders (Shared or not shared, with additional privacy locks available),etc.

Don’t get me wrong, I have a myriad of ideas/things I would like to see Joplin do better. But its usability beats Google Keep - by far. And by now my extended family has adopted it - from an 8 year old to an 80 year old.

Realtime? No. There are various Tab Solutions for that,like Etherpad,etc

But especially if you selfhost you can put in really short synch times, that will give you near real time collaboration and comes out of the bo without any plugins.

Joplin? Can basically do all this.