no worries! 🙂
crossing my fingers for you while we wait 😄
no worries! 🙂
crossing my fingers for you while we wait 😄
No worries, however I cannot see the SATA marking on yours, just the SAS, or perhaps I am blind, changed contact model today…but please double check before ordering.
And yes, Dell does not manufacture hard drives, so it’s almost 100% a OEM rebranding.
if however, it is this drive it should support SATA
https://www.minitool.com/backup-tips/sas-hard-drive.html?amp
you can, if you read my edited post, as long as the SATA logo is present on the label of the sas drive
as mentioned in the description of the product
there is cheap controllers as well btw:
https://a.aliexpress.com/_ExfUSap
lots of cheap electronics for all your needs over there :)
sorry if I misunderstood, but wasn’t his drive sas, and he needed to go to sata connections? this does that.
sas hdd => sata controller connetions
the converter is not the culprit, the drive needs a sata logo on the label for it to work the other way, which is mentioned on the sales page.
if the drive had that logo or not is not mentioned as far as I can see
(edit, thought it was OP replying at first, so changed that, and added requirements for the adapter)
Haven’t tried it myself, but there is cheap converters available on AliExpress:
https://a.aliexpress.com/_EwYtdeV
Might be worth it to avoid using it as a paperweight?
you’re welcome :)
or since you probably are from Denmark since you mentioned Danish in your other comments:
🇩🇰 bare hyggelig, og håper du fikk løst problemet ditt 🇳🇴
thank you :)
not to be that guy . but have you tried to search for an answer?
https://github.com/flatpak/flatpak/issues/4435
first hit on “flatpak question marks”… it’s due to the font you use in the terminal does not support or not fully support Unicode characters or your locale settings are not correct.
hope this helps and answers your question :)
(edit, lost part of a sentence)
also, remember that the old drive now share the UUID with the NVMe drive (which is why I recommended using partition UUID and not disk UUID), so you will have to create a new GPT signature on the old drive to avoid boot issues if both drives are connected at the same time during boot, otherwise you might run into boot issues or booting from the wrong drive.
sorry for the late reply, the command ‘lsblk’ can output it:
“sudo lsblk -o +uuid,name”
check “man lsblk” to see all possible combinations if needed.
there is also ‘blkid’ but I’m unsure whether that package is installed by default on all Linux releases, so that’s why I chose ‘lsblk’
if ‘blkid’ is installed, the syntax would be:
“sudo blkid /dev/sda1 -s UUID -o value”
glad you got it fixe, and hope this answers your question
(edit pga big thumbs and autocorrect… )
probably the disk UUID has changed because of the path to the NVMe vs SSD. If you use partition UUID, they will be exactly the same, but the UUID of the physical disk is not cloned, as it is a identifier of the physical device and not it’s content.
change it to partition UUID and it will boot.
or you might be unable to decrypt them at all
or, if it was a LG phone, could they be encrypted?
if so, perhaps this will help https://github.com/kamicater/LG-Gallery-Decryptor
if you have access to a windows computer, or perhaps wine can work?, there might be a solution in the bottom of this thread where someone had a similar problem
https://superuser.com/questions/972013/how-to-repair-corrupt-jpeg-files
haven’t tested it, so do some antivirus checks on the tool before you decide to test it just to be sure.
good luck, hope you get it sorted
one way that works for some is to trick your mind by schedule your worrying to a time and date in the future and tell yourself you will handle it then. this gives you a “solution” for your mind to stop worrying about it now, as you have a plan to do it later…
worked for me quite a few times actually…
good luck, and hope you get it sorted eventually either way.
Er jo en hel Lemmy instans for Danmark her, så det finnes nok flere av osw, og ja, jeg er fra Norge 🙂
Håper det ordner seg når du får installert ny font når du har tid og anledning til det 🙂