Specifications:

  • Full size (80ish+ size with a reduced numpad will also work)
  • ISO key layout (as in, a proper Return key. ANSI can burn)
  • Numpad
  • Wireless (if possible)
  • Don’t need any RGB
  • I don’t care about keycaps, so any leftovers will do. They don’t even have to be representative of the actual key, random letters and symbols will be fine, even duplicates

When I wasbinto RC Helicopters i liked flying, but didn’t get much entertainment feom building. This other guy liked building but didn’t care that much about flying. I was hoping to run into someone similar here.

EDIT: The helicopter sory as I posted it elsewhere, in case anyone cares. https://lemmy.ml/comment/2517850

  • Moghul@lemmy.world
    link
    fedilink
    arrow-up
    30
    ·
    1 year ago

    Uh… Just buy an off the shelf model. Keychron and Leopold make good keyboards for example. I’m sure others will post other recommendations, but what’s your budget, which continent do you need it shipped to? Maybe you have local tech shops that sell computer peripherals.

    • wvstolzing@lemmy.ml
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Yeah, I’m really happy with my Leopold which I’ve been using for the past 3 months. I used to have Unicomp before that; and while the typing feel was a little better than the brown switches I currently have on the Leopold, its build quality was lower, and eventually it just died on me thanks to what I later found out was a notoriously failure-prone controller they used to use back then. I’m told that Unicomp’s build quality has improved a lot since then.

      … though the frustrating thing is that I was able to get the Unicomp only because I was living in the US at the time; and the Leopold I got thanks to relatives in S. Korea. Where I live, ‘mechanical keyboard’ is treated like a synonym for ‘gamer keyboard’, and all the BS associated with that.

      So excellent off the shelf brands exist, though one has to do some local research first.

    • vettnerk@lemmy.mlOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Budget: Undecided. No hard limit, as long as it’s reasonable. maybe 150-200 usd equivalent.
      Location: Norway.

      Keychron looks like they have what I’m after. The Q5 looks nice.

    • AureumTempus@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      No offence and also totally random, but Leopold sounds like one of those naughty undergarment brands for couples.

      • Moghul@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        No offense taken, and it totally does. Kind of a pompous name for a peripherals company but they do make high quality stuff, so fair game, right?

  • Pepe Godzilla@lemmy.ml
    link
    fedilink
    arrow-up
    3
    ·
    edit-2
    1 year ago

    i think you might overestimate the building part.

    If you get a barebones board with a hotwap PCB you have to screw in stabilizers for all keys larger than 2u (=2 keys) - Shift, Enter, Backspace and Space. Since you can’t be arsed, screw lubing them. Just screw them in, takes 3 minutes.

    Then, place all the switches on Plate and PCB and since they’re hotswap you just press them in.

    Then place like 8 gaskets or screws, drop on your PCB-Plate-Switch-Sandwitch, screw together top and bottom with 4 more screws.

    When you’re done, mount the caps, also just pop them in place.

    That’s it. I reckon it’s about as much work as a 10$ Lego set.

    But going prebuilt is far easier of course: Unpack, plug in, done. If you get a hotswap you can change switches later on if you fancy.

  • wjrii@kbin.social
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    Keychron has the K10 (full size) and K13 (TKL footprint with most of the numpad) in wireless ISO.