I’ve bought the idea of getting an ergo keyboard for work, but it’s too expensive to buy one from where I live, so the last days I’ve been learning and designing my own.

I know it won’t be as good as a manufactured one but I really want to see how the result will be

  • gusVLZ@sh.itjust.worksOP
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Wow, great content, it will definitely be helpful once I start building the keyboard, my father in law works with laser cutting and acrylic so I’m planning on using it for the case/board

    About the inkscape tip, I’m doing this, helped a lot because I could fine tune the angles and offsets pretty quickly

    • humanplayer2@lemmy.ml
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      1 year ago

      Edit: I put up my .svg files here, in case they might be useful.

      Cool! I just did a full Inkscape+laser-cutting build using MDF and acrylic. I’m still to write something up about it, though. In short, I used a 1,5 mm acrylic bottom cover, on top of that 2x 3mm MDF as “case” (minimum height with a 1,5mm plate), the top one supporting the plate, but with larger holes so the switch clamps fit, a 1,5mm acrylic plate, and finally another MDF layer on top of the plate, outlining the keys, for aesthetics and rigidity.

      After having set up the keys, I used mainly offsets around those to do the outline etc.

        • humanplayer2@lemmy.ml
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          Thanks :)

          Yes, I do! I enjoyed a cardboard prototype before, and only just finished this. I really like it. The fit is great, and I like the sound. I gave it some small feet in the back (some 3mm foam tape) to lift it a bit from the table/deskmat, to get some more sound out - there’s zero space between the switches and bottom plate… And I like the sound.

          Switching to the prototype, I switched to Colemak, too. I’m still learning that. So I’m by no means a fast typist on it yet. But I already know better where the keys are on Colemak than I did on QWERTY, and I think the symmetric, column-staggered layout helped a lot with that.

          • gusVLZ@sh.itjust.worksOP
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            I did a prototype using cardboard today to test how typing would feel, I loved the column staggered layout, feels way better than the default, I might give a try one day to colemak, but I’ll try not to change radically now, once I get used to the split keyboard I’ll try other things too

            • humanplayer2@lemmy.ml
              link
              fedilink
              arrow-up
              1
              ·
              1 year ago

              Yes, column stagger is amazing! Congrats on the prototype! I ended up using mine a bit over a month before getting a nicer, revised version cut. I learned from that. Removed some keys, moved some a bit.

              I’ve read elsewhere that switching to a new layout is easier at the same time as changing to ergo, instead of later. I’ve had some time off, that’s why I did it now. If I had been busy, I’d rather have started using my new board and the old layout.