I’m looking for some help researching how to clean long tubes, such as maybe 1/4 inch pickup tubes for a water pump that may be 20 feet long. I’ve been able to find hydration bladder cleaning kits that allow for cleaning the first 2 or 3 feet of these tubes, but beyond some sort of high pressure/high flow system with high caustic cleaning solutions, I haven’t found a good way to swab out a long tube.

  • Junkers_Klunker@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    edit-2
    1 year ago

    That is what we use on big hydraulic systems where the lines can be hundreds of metres long.

    1. Flushing
    2. Pigging
    3. Flushing again

    All this while bypassing all aggregates like motors, pumps and pistons.

    • planetaryprotection@midwest.social
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I used to work in a brewery and we used hot caustic followed by acid for cleaning most things but some pneumatic (spent) grain systems got pigged in freezing weather to avoid the wet grain freezing into a plug.