Slipped a chain, luckly its vietnam so I only had to push the bike down 200 feet of highway and 1 intersection before I found a Honda shop. I’m lucky I wasn’t stranded in some mountains or offf-road.

  • usualsuspect191@lemmy.ca
    link
    fedilink
    arrow-up
    2
    ·
    15 days ago

    Isn’t this caused by not replacing the chain often enough? It stretches a bit once worn and then can bear more towards the edges of the sprocket.

    • dual_sport_dork 🐧🗡️@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      15 days ago

      It’s caused by age and wear. Plenty of things can exacerbate said wear and cause you to replace sprockets sooner, but they are a consumable item and will need to be replaced occasionally no matter what.

    • dingus@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 days ago

      My owner’s manual says to only replace the chain and sprocket together and that only replacing the chain will cause rapid wear.

      • usualsuspect191@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        9 days ago

        Interesting! I’m coming at this from a cycling perspective where checking your chain for wear is important to reduce wear on the cassette/chainrings (sprockets). There are dedicated tools to measure chains for this reason so it’s surprising to me that the same process isn’t common in motorcycles. Maybe it’s a cost thing? A chain is way cheaper to replace on a bicycle than the multiple sprockets.

        The pins of the chain wear out their bushings over time and the chain then stretches. This means each link won’t sit down deep valley between the teeth and wear down the teeth faster due to smaller contact area now acting as the bearing surface.

        • Alcoholicorn@mander.xyz
          cake
          OP
          link
          fedilink
          arrow-up
          1
          ·
          9 days ago

          There’s only 2 sprockets on a bike, since it uses a geared transmission. I got my chain and sprockets replaced for 18USD, labor included, which I suspect is somehow more than it would cost for a non-single speed bicycle, because bicycles prices are weird.

          • usualsuspect191@lemmy.ca
            link
            fedilink
            arrow-up
            2
            ·
            9 days ago

            Under $20 explains why nobody worries about it. You could probably extend the life of the sprockets by replacing the chain, but it’s not worth the hassle at $20 for a whole new set.

    • Alcoholicorn@mander.xyz
      cake
      OP
      link
      fedilink
      arrow-up
      2
      arrow-down
      1
      ·
      edit-2
      15 days ago

      Riding up mountains, over dirt, and constant acceleration and braking probably exacerbates things. It slipped while accelerating on a dirt shoulder to overtake a bus.